How To Remove Kitchen Cabinets: A DIY Guide

How To Remove Kitchen Cabinets: Removing kitchen cabinets from the wall can be a tricky and frustrating process.

This is because the cabinets are mountings for the wall, and you can’t just remove them from the wall and move them somewhere else. You need to first remove the cabinets from the wall. This can be frustrating and time-consuming for a novice, but it will become easier with practice.

If you’re looking to remove your kitchen cabinets without ruining your wall, you’ll want to follow our step-by-step guide. We’ll take you through the entire process, from preparing your wall to removing the cabinets.

Keep reading to discover how to remove kitchen cabinets easily.

how to remove kitchen cabinets

Cabinet Removal Tools

When removing kitchen cabinets, you’ll need tools to handle the job. Luckily, most homeowners already have most of these tools in their garage or workshop.

You can use these tools without taking up a whole lot of space.

So, if you’re looking to remove your kitchen cabinets, you’ll want to keep these tools on hand.

Most homeowners will have:

  • A measuring tapes
  • A pencil
  • A saw
  • A hammer
  • A pry bars
  • A screwdriver
  • A level
  • A wrench
  • A clip/screwdriver handle

Prep the Area

The first step in removing kitchen cabinets is to prepare the area. You’ll need to take down any wallpaper or paint and cover any flooring with drop cloths or cardboard.

Ensure there’s nothing inside the wall that you don’t want to damage. Plus, make sure the area is clean and free of any dust.

You’ll also want to ensure that you’re wearing proper gloves and safety goggles.

These will protect you from any splinters or dust, and you’ll also have more grip strength when you handle the cabinets with your hands.

Disassemble Cabinet Fixtures

When you get to the step of removing kitchen cabinets, you’ll want to start by disassembling the cabinet fixtures. You’ll want to use a screwdriver to remove the cabinet screws from the cabinets and the wall.

This will make it easier to remove the cabinets without damaging the wall.

It would help if you took a pry bar to pry off the cabinet doors and drawers. This will make it easier to remove the cabinets without damage to the doors or drawers.

Take Off Trim and Seals

Once you’ve removed the cabinet fixtures, it’s time to start taking off the wall coverings and finishes. Start by removing the wall coverings, such as paint and wallpaper. Then, use a putty knife to remove the wall covering.

Pay particular attention to spots where the wallcovering meets the studs.

Next, remove the wall coverings from the trim. You’ll want to remove the baseboards, too, so you can access the wall behind the baseboards.

Use a trim tool to remove the baseboard, and then remove the wall covering from the trim with a putty knife.

Removing the Upper Cabinet

To remove the upper cabinet, follow these steps:

1) Place Supports:

You’ll want to use supports to hold up the upper cabinets while removing the lower cabinets. You can use 2×4 pieces of wood or 2×6 pieces of wood.

Make sure they’re long enough to hold up the weight of the upper cabinets. Nail them into place with a hammer and nails.

2) Remove Brackets:

Next, you’ll want to remove the brackets that connect the upper cabinet to the wall. Use a pry bar or a flat head screwdriver to remove them from both sides of the border at once.

3) Remove Baseboard:

You can start removing all of your baseboard trim from around your kitchen. Use a small tool and putty knife for this, and wear gloves for protection against splinters and dust.

4) Begin Removing Upper Cabinet:

With all of your trim removed, you can now begin removing your upper cabinet by pulling it up from one side at a time. Start by prying off one side with a pry bar while supporting it with your free hand on the other side of the cabinet.

Be sure to have another person help you if necessary!

5) Lift Cabinet Off:

Finally, lift the cabinet and set it aside. If you have help, you can permanently remove the cabinet with both hands; be sure to support it on both sides at once.

Once you’ve removed one side of your upper cabinets, repeat this process for the other side.

You may have to remove trimmer or baseboards to get to the other side of your upper cabinets.

Removing the Lower Cabinet

Now for the last step, you’ll want to remove the lower cabinet by following these steps:

1) Remove Baseboard:

Use a small tool and putty knife to carefully remove each row of trim one end at a time.

Use a level every so often to ensure that your new wall isn’t off-level with your walls. Be sure to wear gloves and eye protection when doing this.

2) Remember to Repair Screw Holes:

As mentioned earlier, remember to repair any screw holes outside your walls before painting over them! You can patch these holes with spackle or wood filler, sanding down two coats of paint if necessary.

This will ensure that your new baseboards will stay level after installing them later.

3) Start Removing Cabinet:

You can start pulling out your cabinet from its side at an angle.

It may be stuck on with several layers of wallpaper, so use something heavy like a hammer or sledgehammer to get it unstuck.

Just hold it on one side parallel with the ground for leverage and pull forwards slowly and steadily until it’s completely removed from the wall.

You can also lift and remove the upper cabinet while removing the lower if you freed it first.


As you can see, it’s not that hard to remove a cabinet of wallpaper in your house if you follow proper safety measures and have the right supplies.

Although this process has its hazards, proper planning is always helpful as you embark on removing a wall of cabinets covered in paper, especially if there are still power lines nearby.

Make sure to use your wits and take your time when removing any wall of cabinetry before simply giving up!

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.