How To Hide Water Heater In Laundry Room

One of the oldest and most effective ways to prevent mold and moisture build-up in your home is air circulation.

Air is a natural barrier to moisture, so when there is little to no circulation in your home, the water can quickly build up on walls, floors, and other areas.

This is especially true for areas that don’t have much airflow. If you have a water heater installed in a place that doesn’t get much natural sunlight, you may also want to keep it hidden from view.

This is where a water heater in the laundry room can come in handy. This article will discuss installing a water heater in a laundry room and keeping moisture and mold growth to a minimum.

how to hide water heater in laundry room

Add a Closet

The first step in installing a water heater in a laundry room is to add a closet or storage space.

A dedicated closet with a ventilated door will allow you to install a water heater without worrying about moisture seeping into other parts of your home.

If you don’t have the room in your laundry room for a full-sized closet, you can easily create a mini cabinet by adding shelving.

If you’re looking to create a mini closet with shelving, you’ll need a stud finder to locate the studs in your laundry room. Once you’ve found the studs, use a hammer and nails or screws to secure two pieces of wood vertically on both sides of the wall.

Then, add two horizontal pieces of wood across the top and bottom vertical pieces.

Finally, add another layer of vertical wood on both sides for extra support and stability.

If you want extra security, drill holes through the horizontal pieces and into each vertical wood piece to secure them with nails or screws.

After creating your mini-closet by adding shelf supports, it’s time to install your water heater into your new storage area.

Depending on how much space you have available inside your closet or storage area, there are many different sizes of water heaters that will fit comfortably inside.

Before installing your water heater, ensure it will fit comfortably in its new home by measuring the closet before purchasing a unit that may not work well inside.

The best way to measure is by using a tape measure to get both width and height measurements for the area you’re planning to install your water heater.

Install it.

Create a Hot Water Cover or Cabinet

If possible, try to locate your water heater to get plenty of natural sunlight. This will help keep the water heater from getting too warm and condensing moisture inside the cabinet.

To prevent this, place a thin metal sheet (a metal roofing or tin roofing sheet will work fine) over the top of your water heater.

This will help to bounce the heat back into the room, keeping it from condensing on the inside of your cabinet.

If a metal roofing sheet is too heavy for you to move, a smaller, lighter-weight alternative is a polyethylene terephthalate (PET) drinking water cover.

Hang Curtains

Hanging curtains will help keep the sun’s heat radiating directly into your water heater’s cabinet.

To hang curtains, first, measure the distance between the top and bottom of your water heater. Then, buy a roll of fabric approximately 1/2 inch wider than the measurement you just took.

Then, please measure the length of fabric you need and cut it in half. After cutting, sew a hem on one end of each piece of fabric that will be hanging down from your water heater.

Finally, attach one piece of fabric to both sides of your water heater with clear packing tape or screws and nails or staples for extra security and stability.

Use a Room Divider or Screen

If installing a water heater in a room with high ceilings isn’t an option, you can try to use a room divider or a screen to keep the water heater from touching the top.

This can help to reduce condensation on the ceiling and keep the room from getting too humid. If you don’t want to go to the trouble of building a divider or installing a screen, you can also try to place a towel or two between your water heater and the ceiling.

Risks Related to Open Water Heater

Although hiding a water heater in a closet or other out-of-the-way location can help to reduce the risk of mold and moisture damage, there are still some risks that you should be aware of. Make sure to keep your water heater out of reach of children and pets, especially if you have them in the house at the same time.

If a child or pet manages to access the water heater, they could put their hands or feet near the opening and get burned.

This is because the water in the heater is at an extremely high temperature.

Advantages of Hiding a Water Heater

By installing a water heater in a closet or other out-of-the-way location, you can prevent unwanted guests like children and pets from accidentally getting hit by the water stream while using the bathroom or washing dishes.

This, in turn, can prevent injuries and accidents that can occur

when people are in the room while the water heater is on.

FAQs

Q. Since Your Water Heater Is in the Closet, How Will You Clean It?

You can use a simple vinegar and baking soda solution to clean your water heater without turning on the water. If you want to eliminate any mold growth or mildew that may have developed around the cabinet, you can use an environmentally friendly alternative like borax or a natural detergent made from tea tree oil and lemon juice.

Q. Is It Safe to Install My New Hot Water Tank Outside?

If your city or municipality has passed laws about installing new heating systems outside, it is safe to install your new hot water tank outside.

However, if your city or municipality doesn’t have any such laws, then be sure to follow all safety precautions when installing your new hot water tank and make sure that you keep all potential risks in mind before going ahead with the installation process.

Conclusion: How To Hide Water Heater In Laundry Room

Hiding a water heater can help you save money on your monthly utility bills by reducing your water heater’s amount of energy.

It can also help protect your home from mold, moisture damage, and other problems caused by high humidity.

By installing a water heater in a closet or other out-of-the-way location, you can avoid these problems.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.